Jump to content

Pathfinder 23DV


Saltexpress90

Recommended Posts

2002 Pathfinder 23 DV with a 2016 Suzuki 250 with 575hrs. I just replaced all the wiring and connectors throughout the whole boat along with nearly every screw with 316 stainless from McMaster Carr. Nothing was wrong with any of the wiring except the bilge pump wiring so I went ahead and replaced all with Ancor duplex wire and Ancor heat shrink connectors. I put over $7k just in materials this past fall. It is in excellent condition, I wouldn’t be scared to go anywhere with it. I have the engine files downloaded from NOV 2020 with complete report for anyone interested. $62,000. 252-714-6496 Located in eastern NC  Can text pictures 

 

-NMEA 2000 network installed 

-Garmin 1040xs with airmar P66 transducer

-Simrad AP24 autopilot

-Fusion RA55 Marine radio with 4 Fusion speakers and 4’ Shakespeare AM/FM antenna

-Fusion USB plug in dash for charging and streaming to radio NOV 2020

-Lenco Trim tabs with LED indicators NOV 2020

-Standard Horizon VHF with Shakespeare Galaxy 8’ black antenna

-(2) Rule 1500 gph bilge pumps with separate Rule auto float switches replaced NOV 2020

-(2) Rule 1100 gph livewell pumps replaced NOV 2020 feeding a 50 gallon leaning post livewell

-110 Gallon fuel tank ( new sending unit and wire replaced NOV 2020 )

-TTop fabric replaced with stamoid NOV 2020

-New spreader lights and under gunnel lights installed NOV 2020

-5 peice spray curtains (wings never used)

-Taco 170 outriggers with brand new 15’ single rigged poles

-(2) blues seas switch panels installed NOV 2020

- Perko stealth series LED anchor light installed NOV 2020

-Jabsco washdown pump replaced AUG 2020

-All maintenance completed on motor in NOV 2020 including oil change and filter, lower unit oil, water pump, spark plugs and internal fuel filter.

- New fuel line from tank to water separator filter NOV 2020.

I have every receipt spent on this boat since January of 2015!!! I’m sure I’m leaving some things out that I have done in the past year but I have the receipts for everything. Most of everything was replaced just to ensure it was done right and my OCD. 

 

2016 EZ loader trailer that loads and unloads effortlessly. Pulls like a dream and I have replaced all bearings and seals in FEB 2021 for preventative maintenance as I do every year along with full detail inside and out. 

 

Titles to boat and trailer in hand, boat stays in enclosed storage year round. Will get more pictures this weekend. Most of these pictures are before all work was done in NOV 2020.

 

$62,000

3C87F16D-B676-4915-AC4C-52159BBE6127.jpeg

0A6A4E25-5D82-4E7E-A0AD-ACF762F2435D.jpeg

A9BCA075-D544-4151-960F-0F85F5685807.jpeg

414BB711-498D-430B-9BD6-562926274249.jpeg

838E44A6-9198-479C-8767-0D048F7E5092.jpeg

790AC04E-BA3E-4B16-B15E-F6106C0B5CBA.jpeg

765560FC-2C13-4FAB-A754-DDFC5B074285.jpeg

 

5F9098DE-59CC-4329-98B1-8A2191F5065A.jpeg

CDA495CB-5AE1-4F7C-A3D1-FC563038AA21.jpeg

01C4633F-9012-4D51-BEE4-AF76F5D74C37.jpeg

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...