CarlosECarlos Posted March 31, 2020 Report Share Posted March 31, 2020 Literally brand new - on my boat for one outing. Paid $540, asking $400 and you cover shipping! Port Charlotte area... 816-507-1640 (text only) Quote Link to comment Share on other sites More sharing options...
Miss Jazzy Posted April 6, 2020 Report Share Posted April 6, 2020 What motor was this on Quote Link to comment Share on other sites More sharing options...
CarlosECarlos Posted April 7, 2020 Author Report Share Posted April 7, 2020 F300 Yamaha, but it will fit others. See picture of box (label) supplied and or call PowerTech - they can walk you through it all... Quote Link to comment Share on other sites More sharing options...
Miss Jazzy Posted April 7, 2020 Report Share Posted April 7, 2020 Thanks. I think I need a 21 pitch. I’ve got a 200 vmax Quote Link to comment Share on other sites More sharing options...
CarlosECarlos Posted April 8, 2020 Author Report Share Posted April 8, 2020 OK - NP. Be sure not to put too much pitch on it - will load the engine-it should run at least 6K RPM wide open with half tank of gas, moderate load. Of course, needs to be trimmed out properly. Quote Link to comment Share on other sites More sharing options...
jht Posted April 17, 2020 Report Share Posted April 17, 2020 Jazzy this is the one you need for that boat. I tried a 21 and not as good as a 20 on that boat Quote Link to comment Share on other sites More sharing options...
BradM Posted April 17, 2020 Report Share Posted April 17, 2020 Jazzy, I had a hard time spinning this up over 5,600 RPM with a 250 SHO. Lots and lots of bite on this wheel. Quote Link to comment Share on other sites More sharing options...
Miss Jazzy Posted April 19, 2020 Report Share Posted April 19, 2020 Yea had the same prop on my F150 but in 19 p. I figured in would need. 21 for the 200 vmax? Quote Link to comment Share on other sites More sharing options...
Nauti Posted May 1, 2020 Report Share Posted May 1, 2020 You still have this? Quote Link to comment Share on other sites More sharing options...
CarlosECarlos Posted May 2, 2020 Author Report Share Posted May 2, 2020 sold it Quote Link to comment Share on other sites More sharing options...
fin-addict Posted May 2, 2020 Report Share Posted May 2, 2020 On 4/8/2020 at 9:02 AM, CarlosECarlos said: OK - NP. Be sure not to put too much pitch on it - will load the engine-it should run at least 6K RPM wide open with half tank of gas, moderate load. Of course, needs to be trimmed out properly. Not 6k on a vmax. 54-56 as per specs. Brother had 02 22 pathy with 200 vmax. Ran 56 rpm @ 52 mph full tower, 14x21. Non vmax, 6k. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.