snelly Posted February 10, 2020 Report Share Posted February 10, 2020 Did my annual bilge clean the other day. Left bung in put water and bleach in via anchor locker and took the boat for a drive around the block stopping and starting , swinging from side to side to agitate it all and drained out. Later I found this nut in the bilge and after a couple of more trips found the flat washer and toothed washer. I recently repowered and figured that may have dropped a nut used to mount the engine on the transom but the thread on the nut I found is lager than them. I have no idea where this could have come from so I thought I would ask as there a quite a few on this forum who have had the cap off their RF's. Thanks in advance. Quote Link to comment Share on other sites More sharing options...
jim33042 Posted February 10, 2020 Report Share Posted February 10, 2020 Can you check your bow eye? Do you have a lifting eye as well or cleat on topside on the front of the bow? May need to use camera on your phone to reach up in front and take a few pics. Quote Link to comment Share on other sites More sharing options...
HoneyB Posted February 10, 2020 Report Share Posted February 10, 2020 Steering rod Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.