Tgreg1 Posted March 31, 2019 Report Share Posted March 31, 2019 Hi all. Since new I suspect that my boat is not propped correctly. No ttop and hits at best around 5200 rpms trimmed. Has a jackplate. Messed with all kinds of height w jackplate , tabs, trim. Has a Yamaha reliance 19m 13 3/4. Anyone have the same setup? What prop do you use? Link to comment Share on other sites More sharing options...
HoneyB Posted April 1, 2019 Report Share Posted April 1, 2019 I have a 2200trs. The boat came to me with a 19ofx3 blade.. it was not a very good combination. I ran a 19 enertia that seemed to be a great fit on the boat. It would run 52 mph at 5900 rpm. Link to comment Share on other sites More sharing options...
Tgreg1 Posted April 1, 2019 Author Report Share Posted April 1, 2019 Thx what r the other dimensions to the emerita? Link to comment Share on other sites More sharing options...
HoneyB Posted April 1, 2019 Report Share Posted April 1, 2019 14.5 x 19 Link to comment Share on other sites More sharing options...
HoneyB Posted April 1, 2019 Report Share Posted April 1, 2019 My boat does have the sho 200 but 200 ponies should turn a 19 pitch prop. I used to run this same prop on a 150 opti max. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.