Agitator Posted March 21, 2019 Report Share Posted March 21, 2019 Anyone installed a Rhodan trolling motor on a 2300DV? Specifically, how to get wiring from console to anchor locker without laying across deck? Boat is a '02 with the step down console. Planning to use 1/4 aluminum plate for backing plate for the motor mount. Any suggestions? Link to comment Share on other sites More sharing options...
Blue Agave Posted April 3, 2019 Report Share Posted April 3, 2019 Hey Captain, I am new to this forum as well. Welcome. You will need a snake. Like an electrician's snake to run from the Bow of the boat to the center console. You might have an access panel within your center console that you will need to remove in order to run the cables from your Center console to the bow. Add some pix of what you have. I am not so sure of that aluminum plate idea as I think it would get scratched and then take away from the aesthetics of what you have going on. From what I have seen, most boats are using a poly bracket to support the motor. Good Luck and let us know with some pix. Talk to you later, Captain Steve Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.