Jump to content
Sign in to follow this  
FINCHASER

How to- The perfect hatch cable stay

Recommended Posts

18 hours ago, HoneyB said:

I can prolly make a few cables from some coated stainless cable if some one need one. I just need the measurement loop to loop 

I plan on doing the same....West Marine sells it in their rigging section.....as well, I'm going to cover the stainless with a plastic rubber hose....tiny...

 

dc

 

Share this post


Link to post
Share on other sites
On 9/26/2018 at 12:53 PM, FINCHASER said:

Some may have seen my thread on where to get the OEM SS cable replacements as I had one break.  While that Q was answered there were a few other suggestions for alternatives

So I was going to order the cables and took the other off to measure it and noted the rust and crud on it and noted it was about to break as well.  Im normally not a cheap a** when it comes to the pathy but I just wasnt willing to pay what they wanted for something that was going to corrode and sure to break.  I tried the parachute cord and it worked ok but had to shorten the length to account for the stretch once it took the weight of the lid.  Wanted something without stretch and thought the mono Idea might work as it was suggested by JohnD but wasnt sure about the crimp on ends.  I got to looking around and had some 10-12 ga wire ring terminals that were pretty HD.  Found some 500lb mono at a local shop that easily fit into the ring term.  So I melted the ends to mushroom it for insurance and crimped them on.... wouldnt you know they work perfectly zero stretch and will never rust!  Another huge benefit to me was being able to make them to the length I wanted as I didnt care for how far the OEM cables had them open.  Made mine to 12.125" CTC opening of the ring terminals.

 

20180926_122655.jpg

20180926_123113.jpg

20180926_123447.jpg

 VERY NICELY DONE.....

 

DC

 

Share this post


Link to post
Share on other sites
8 hours ago, Wanaflatsfish said:

I plan on doing the same....West Marine sells it in their rigging section.....as well, I'm going to cover the stainless with a plastic rubber hose....tiny...

 

dc

 

I may not have been clear. I have some coated cable and some crimps laying around. I would be willing to make up a cable free of charge if anyone needs one or two. 

Share this post


Link to post
Share on other sites
19 hours ago, HoneyB said:

I may not have been clear. I have some coated cable and some crimps laying around. I would be willing to make up a cable free of charge if anyone needs one or two. 

thank you...i already bought it..but no time to fiddle with it.

nice offer.

 

dc

 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×