Bayfisher34 Posted March 21, 2018 Report Share Posted March 21, 2018 My release well on my 95 bayfisher doesn't seem to be like a normal release well there is 1 drain hole and that's it. On the boats I've been on they have been set up just like a live well. What am I supposed to use this as? Or how am I supposed to use it as a release well? Link to comment Share on other sites More sharing options...
RedfishRippn Posted March 22, 2018 Report Share Posted March 22, 2018 I had a redfisher that did not have the release well plumbed. I bought a livewell kit from west marine and installed myself. One fill pump and one recirculation pump. Link to comment Share on other sites More sharing options...
Bayfisher34 Posted March 22, 2018 Author Report Share Posted March 22, 2018 1 hour ago, RedfishRippn said: I had a redfisher that did not have the release well plumbed. I bought a livewell kit from west marine and installed myself. One fill pump and one recirculation pump. Thankyou that'd make much more use out of the space. Would you be able to give me a link to the exact products or tell me the brand? Link to comment Share on other sites More sharing options...
justfish Posted March 22, 2018 Report Share Posted March 22, 2018 Your also gonna need an overflow if you plumb it Link to comment Share on other sites More sharing options...
RedfishRippn Posted March 23, 2018 Report Share Posted March 23, 2018 Does yours have a drain built in already? Link to comment Share on other sites More sharing options...
mulligan Posted March 23, 2018 Report Share Posted March 23, 2018 On the Bayfisher I had there was a small drain out the transom. I had it plumbed with a "T" off the intake and had to run a hose to the well by drilling into the side of the well. It worked well but I never really used it and when I put a new pump for the main well I never hooked the release back up. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.