Onionrings Posted February 12, 2018 Report Share Posted February 12, 2018 I'm going to try to install some JL audio 7.7 speakers into the designated slots on the hardtop. Can someone tell me what that proper and easiest way to get wires to that location ? TIA David Link to comment Share on other sites More sharing options...
marzomi Posted February 12, 2018 Report Share Posted February 12, 2018 if there isn't already a pull cord coming down the pipe to the t top into the console run a fish tape up the pipe from under the console and pull one down... this is pretty straight forward If its a stock top the wiring harness should already be there Link to comment Share on other sites More sharing options...
ChrisB Posted February 12, 2018 Report Share Posted February 12, 2018 There should already be wires run to hard top. The other end should be with the rest of the rigging under the console. Boat should be prewired for 3 sets of speakers. Link to comment Share on other sites More sharing options...
Onionrings Posted February 12, 2018 Author Report Share Posted February 12, 2018 3 hours ago, ChrisB said: There should already be wires run to hard top. The other end should be with the rest of the rigging under the console. Boat should be prewired for 3 sets of speakers. Yes, this is the stock T-top. I will look later today. Thanks for the replies Link to comment Share on other sites More sharing options...
BradM Posted February 13, 2018 Report Share Posted February 13, 2018 Don't forget the braided line or string, and vacuum cleaner "trick". Link to comment Share on other sites More sharing options...
bsh102 Posted February 13, 2018 Report Share Posted February 13, 2018 The 25 is prerigged with speaker wires for the hard top, rear and front sides of the boat. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.