OlivierHPS2300 Posted November 24, 2017 Report Share Posted November 24, 2017 Does anyone know what size pump is used in Pathfinder 2300? 800 or 1100 model... Thanks ... Link to comment Share on other sites More sharing options...
SCFD rtrd. Posted November 24, 2017 Report Share Posted November 24, 2017 Mine came from the factory with 800's. The 800's are more than adequate for the size of the man live-well. I bought 4 replacement motors and just change motors when they finally burn up. They seem to last about 18 months or so. Link to comment Share on other sites More sharing options...
OlivierHPS2300 Posted November 24, 2017 Author Report Share Posted November 24, 2017 Sounds good .... Thanks. Link to comment Share on other sites More sharing options...
Marshall Spivey Posted March 20, 2019 Report Share Posted March 20, 2019 Need to replace my Piranha live well pump that was made in 2010. Model #357-113-03. The only ones I can find online have a 10 where my 03 is. Anyone know the difference if any? Thanks. Link to comment Share on other sites More sharing options...
Fish Food Posted March 24, 2019 Report Share Posted March 24, 2019 Marshall, I think that you would only need the cartridge. The sku number you indicate is for the pump cartridge and the housing to install a new pump set up. If your pump is broken and you can remove the cartridge from the housing, this is all you need... https://www.westmarine.com/buy/shurflo--piranha-800-1100-cartridge--5379193?recordNum=59 Good luck. Link to comment Share on other sites More sharing options...
Bamaskeet Posted March 24, 2019 Report Share Posted March 24, 2019 I keep a livewell cartridge with a Deutch (sic) connector in the boat, because you never know when a pump will quit and usually it's when your livewell is full of bait! Link to comment Share on other sites More sharing options...
SCFD rtrd. Posted March 24, 2019 Report Share Posted March 24, 2019 I reconfigured the live-well plumbing in my 23 HPS after I bought it. The main live-well pump and the second live-well pump are within 4" of each other. I only use the center/main live-well. If I have a pump failure on the water, I just remove the cartridge from the main live-well and replace it with the cartridge from the secondary live-well. You have to leave a little slack in your wiring to do this, but has worked out well for me. Link to comment Share on other sites More sharing options...
HewesYourDaddy Posted March 24, 2019 Report Share Posted March 24, 2019 2 hours ago, Bamaskeet said: I keep a livewell cartridge with a Deutch (sic) connector in the boat, because you never know when a pump will quit and usually it's when your livewell is full of bait! Very smart idea. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.