BLawson Posted June 20, 2017 Report Share Posted June 20, 2017 Can Anyone post some pictures of the spray rails on their HPX? Specifically looking from the under side. I need to see where they are installed on the rail. Thanks BL Link to comment Share on other sites More sharing options...
conocean Posted June 21, 2017 Report Share Posted June 21, 2017 Mine are approx 10' long (with the bend) & 2" tall. Wish they were 3" tall. Hope this helps.... Link to comment Share on other sites More sharing options...
captbryan Posted August 29, 2017 Report Share Posted August 29, 2017 Thinking about getting some of these. Any problems retro fitting these. 5200 and screw them on I assume. Thanks Link to comment Share on other sites More sharing options...
BLawson Posted August 29, 2017 Author Report Share Posted August 29, 2017 34 minutes ago, captbryan said: Thinking about getting some of these. Any problems retro fitting these. 5200 and screw them on I assume. Thanks I ordered the spray rails today. Yes I am trying to retro Fit these using screws and 5200, but don't know what size screws to use. No one i have talked to has ever put any on. Link to comment Share on other sites More sharing options...
captbryan Posted August 29, 2017 Report Share Posted August 29, 2017 They come predrilled from Mbc so the holes will probably dictate that. I would think#10s. The dealer I spoke with said they had installed a few sets in the last month. Sounded like no big deal but When I drill on the hull it's a big deal to me. Let me know how it goes. Thanks. Link to comment Share on other sites More sharing options...
BLawson Posted August 30, 2017 Author Report Share Posted August 30, 2017 3 hours ago, captbryan said: They come predrilled from Mbc so the holes will probably dictate that. I would think#10s. The dealer I spoke with said they had installed a few sets in the last month. Sounded like no big deal but When I drill on the hull it's a big deal to me. Let me know how it goes. Thanks. My biggest concern is the length of the screws. Too long and they will pop through the top side non skid. I agree drilling holes are a big deal. Link to comment Share on other sites More sharing options...
conocean Posted August 30, 2017 Report Share Posted August 30, 2017 4200 will do the job just fine. I would not use 5200. Call Bob@IMS. Click on link below for his #. He can tell you size & length of screw I'm sure. Link to comment Share on other sites More sharing options...
captbryan Posted September 1, 2017 Report Share Posted September 1, 2017 I do not see a link for Bob@IMS Link to comment Share on other sites More sharing options...
conocean Posted September 1, 2017 Report Share Posted September 1, 2017 Link is in my signature. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.