barebones Posted April 30, 2007 Report Share Posted April 30, 2007 And this is some pic's painted and getting rigged. Link to comment Share on other sites More sharing options...
Donh Posted May 31, 2007 Report Share Posted May 31, 2007 Bones, Where did you find that craft? Love to find something like that sitting in someone's backyard.Is Cutler Bay around Old Cutler and 184 St.? I used to live in Cape Cutler about ten years ago. Donh Link to comment Share on other sites More sharing options...
RedJeep Posted December 29, 2007 Report Share Posted December 29, 2007 That would make my boat your boats big (brother sister)? It would be worth a launch to get a picture of them together in the water. Are you ever in the Key Largo area, in the winter season? Peace Link to comment Share on other sites More sharing options...
barebones Posted December 30, 2007 Author Report Share Posted December 30, 2007 As a matter of fact I will be heading down to marathon to do some backcountry fishing for mackeral next weekend coming up so mabey I can stop by real quick if you like to check our boats' togethere if that sound's alright hit me up with your # and will hook some day to hit the backcountry sometime............. Link to comment Share on other sites More sharing options...
truenative Posted January 30, 2008 Report Share Posted January 30, 2008 How does the Top Cap Separate? I ***ume you first take the Rub Rail off. Then is it attached at the Rod Holders / Support Ribs? Also did you replace your actual stringers yourself or did you just re-deck it? Link to comment Share on other sites More sharing options...
barebones Posted February 1, 2008 Author Report Share Posted February 1, 2008 truenative whats up, all you need is a couple of painter spatullas,a hammer and some patience. When you take the rubrail off you will see where the deck and hull was laminated togethere and all you need to do is get the spatulla and the hammer and where the center is at just hit it the spatulla until it goes through the other side. Also I did not have to do anything to the stringer because they were made from kevlar.... Any othere question feel free to ask. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.