YankeeRedfisher Posted January 25, 2017 Report Share Posted January 25, 2017 I have a 2003 RF18 and am not getting 12vdc to the second Livewell Pump. The pump is good, its just not getting 12 vdc. Does any one know if the LW switch goes directly to the fuse block before continuing on to the LW in the bilge.I have several 5 amp fuses in the block but they all look good. Link to comment Share on other sites More sharing options...
SCFD rtrd. Posted February 14, 2017 Report Share Posted February 14, 2017 First you got to determine if you are getting 12 volts to the switch. Then, are you getting 12 volts out of the switch. You can trace the hot wire from the switch to the fuse panel to determine which fuse or breaker services the live-well pump. Don't forget to check the ground wire from the pump to the grounding block. Link to comment Share on other sites More sharing options...
YankeeRedfisher Posted February 15, 2017 Author Report Share Posted February 15, 2017 Thanks for your input. Found the problem ; imbedded in the wire bundle m a blown fuse. All wiring out of the bilge to a waterproof terminal board. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.