WTB 13.25 x 15 prop

[mdemott]

Looking for a 13.25x 15 stainless steel prop for a Yamaha F115
The Power Tech part number is NRS3R15PYM90. Don't necessarily need a Power Tech as it is comparable to a Turbo 

 

[mattconrad]

I have the following below.  Thanks, Matt 352-317-5105

157) 13 1/4" X 15P POWERTECH, YM90RED3R15P, PRESSED YAMAHA STYLE, SHOWS WEAR, $ 150

158) 13 1/4" X 15P 4 BLADE SOLAS, 1453-133-15, LOOKS NEW, PRESSED MERCURY STYLE, $ 300

176) 13 1/2" X 15P SOLAS, RUBEX PRESSED HUB, 9431-135-15, LOOKS ALMOST NEW, $ 225

177) 13 1/4" X 15P MICHIGAN WHEEL RAPTURE, PRESSED HUB 15 SPLINE, REPITCHED FROM A 17P, RECONDITIONED, 063043, LOOKS NEW, $ 225

[Marshfly]

I have an NRS4R16PYM90 that has been adjusted to 14 pitch that might work for you. It has slight nicks on the leading edge. Nothing even 1/16" deep. I would take $200 shipped for it.

[mdemott]

On 9/20/2016 at 10:01 AM, mattconrad said:

I have the following below.  Thanks, Matt 352-317-5105

157) 13 1/4" X 15P POWERTECH, YM90RED3R15P, PRESSED YAMAHA STYLE, SHOWS WEAR, $ 150

158) 13 1/4" X 15P 4 BLADE SOLAS, 1453-133-15, LOOKS NEW, PRESSED MERCURY STYLE, $ 300

176) 13 1/2" X 15P SOLAS, RUBEX PRESSED HUB, 9431-135-15, LOOKS ALMOST NEW, $ 225

177) 13 1/4" X 15P MICHIGAN WHEEL RAPTURE, PRESSED HUB 15 SPLINE, REPITCHED FROM A 17P, RECONDITIONED, 063043, LOOKS NEW, $ 225

 

2 hours ago, Marshfly said:

I have an NRS4R16PYM90 that has been adjusted to 14 pitch that might work for you. It has slight nicks on the leading edge. Nothing even 1/16" deep. I would take $200 shipped for it.

Thanks

I am dropping from a 17 to a 15 as per the recommendation of PowerTech.  Looking for a three blade as I am only spinning 5k at 39mph, SOG. Would like a little more economy. Will keep you in mind though.