civilized Posted June 27, 2016 Report Share Posted June 27, 2016 Does any one know what size (diameter and thread) plug will fit in the hole of an 06 2200V? I have the stainless "female" threaded fitting made into the deck of my boat, but it is an opening that I don't use. Was looking to thread a stainless plug in it. I assume it's for a front fishing chair post. I don't dead bait/water to just sit in the insert if I forget it.... Thanks Link to comment Share on other sites More sharing options...
Grant Posted June 28, 2016 Report Share Posted June 28, 2016 That is a "deck fill" fitting, same as used for the fuel fill. Not sure if it's 1-1/2" or 2-1/8". My front seat post stays put, so I need to find where I put my old cap to measure it. The caps are available by themselves from many sources. Here's a link to some at West Marine: http://www.westmarine.com/buy/west-marine--stainless-steel-deck-fills--P005343298 Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.