Miss Jazzy Posted June 21, 2016 Report Share Posted June 21, 2016 With all the talk about drink holders I was wondering if anyone has installed the Mate series rod/cup holders. Looks like a great way to kill two birds with one stone since my boat does not have any gunnel mounted rod holders(I know very strange). They should be an easy instal since you don't have to drill an angled hole. Link to comment Share on other sites More sharing options...
smooth move Posted June 21, 2016 Report Share Posted June 21, 2016 I make all my cup holders with a 1 1/2" hole in the bottom so that you can put a rod in it if you need to. you'd be surprised how often it comes in handy, real good when you need to set the rod down fast to re tie Link to comment Share on other sites More sharing options...
bigsnook35 Posted June 21, 2016 Report Share Posted June 21, 2016 I have them but do not have them installed yet. They are very stout and you still have to be careful with he hole if you buy the angled one as it requires a lot of clearance underneath. Link to comment Share on other sites More sharing options...
Miss Jazzy Posted June 21, 2016 Author Report Share Posted June 21, 2016 I was thinking about putting one on each side on the gunnels just forward of the cleats where there sould be some anyway. Should be plenty of room there. I'm also wanting one up on the bow in front of the anchor locker. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.