FLConch Posted May 6, 2016 Report Share Posted May 6, 2016 I had a 150 vmax on this 2000 pathfinder 2200v. Decided to put a new yamaha 150 four stroke 20" shaft on the boat. Cruising at 35mph at 3800 rpms and 47mph wot at 6100 rpms. Very happy with it. Link to comment Share on other sites More sharing options...
JEM Posted May 17, 2016 Report Share Posted May 17, 2016 Very good numbers on your repower!!!! I'm jealous. I have an F150, 20" shaft, on my 2007 2200V. When I put an Atlas jp on, the 3 blade Yamaha prop didn't have enough bite, so I had to change to a 4 blade prop. I was wondering what 3 blade prop you are running, and are you able to jack up the motor any before it starts ventilating? Link to comment Share on other sites More sharing options...
lurem Posted June 9, 2016 Report Share Posted June 9, 2016 Nice job! looks good! Did you have similar performance numbers with the VMAX? Link to comment Share on other sites More sharing options...
fishmanjj Posted June 16, 2016 Report Share Posted June 16, 2016 I have a F150 on my 2200xl and with a Power Tech 4 blade 16" she runs 44mph @ 5700 ( which is WOT) and with Yamaha 3 blade stainless 19" she's at 46 mph @ 5800. I cant seem to get 6000 rpm out of it. No jack plate. Maybe the motor is mounted one hole too low ? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.