awildseahorse Posted January 6, 2016 Report Share Posted January 6, 2016 I picked up a couple of the blue Lumitec courtesy lights for my 1810V and was wondering if any one has installed these before and where you put them, or if any one has any suggestions on placement. I was thinking about down low in the sides of the console simply for ease of wiring, but I'm not opposed to running wires else where if need be to get the best lighting arrangement. Thanks for the advice! Link to comment Share on other sites More sharing options...
linesider 159 Posted January 6, 2016 Report Share Posted January 6, 2016 Down low on the side of the console has always worked for me Link to comment Share on other sites More sharing options...
fin-addict Posted January 6, 2016 Report Share Posted January 6, 2016 x2 Link to comment Share on other sites More sharing options...
SCFD rtrd. Posted January 6, 2016 Report Share Posted January 6, 2016 If your console is elevated with a toe-kick, then mount the lights under the toe-kick. If the console is mounted to the floor, then the sides of the console is probably the best option. Temporarily connect the wires and stick the lights on with two sided tape. When it gets dark, go out and move the lights around to find the best spot. Link to comment Share on other sites More sharing options...
awildseahorse Posted January 7, 2016 Author Report Share Posted January 7, 2016 Great advice! Just hooked one up to a drill battery and took a look. Low in the console looks great. Thanks, guys! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.