Search the Community
Showing results for tags 'jl audio'.
Found 2 results
Over the weekend, I was able to get started on getting my new JL sound system connect. I began by wiring up the amp (JL M600/6) to the radio (Fusion MS-70Nn), to the batteries, and mounted it. Then swapped out the Sony 6in speakers that the previous owner had installed for some new JL M770s. The only down side to this was the previous owner unevenly mounted the speakers. With my best efforts, I was able to close the gap between the speakers a bit, but one speaker is about 7 inches below the window on the port side of the console and the other is about 9 inches on the starboard side. After getting this all setup I moved over to the rod locker. I was able to drill the hole with the Dremel Tool just fine. Running the speaker cable from the center console over to the rod locker was simple with a glow rod. I used the hatch in front of the center console to feed the glow rod and then pulled the speaker cable threw and over to the hole. To mount these big M880 I had made spacer rings from ½ inch starboard, but to my luck it was not enough. I had to stop the project there and am now looking for 1 in starboard to finish the project this holiday weekend. I am avoiding having to cut into the rod locker its self. Am trying to save that as the final and last option. I have attached a few pictures below. More to come.
Hey guys, just wanted to show off my 2016 Pathfinder 2300 HPS. This is my second 23 HPS. I love the boat hull design and ride, for the Tampa Bay and west coast of Florida this is the perfect boat for me to run offshore, across large bodies of water and still get into shallow flats and backwater. 2016 Pathfinder 2300 HPS Guide Green with white powder coat Yamaha 250 SHO Dual 10' Blade Power-Poles MinnKota iPilot MinnKota 4 bank charger JL Audio M880 (4) JL Audio MHD 600/4 Amp with BlueTooth module (no head unit) Custom built platform SeaDek under gunnels, on console, and platform Recirc and bubblers in livewell and release well Lowrance HDS 12 Gen 3 with Yamaha Command Link cable for displaying motor data Custom Acrylic Livewell lid (for keeping an eye on my fish during tournaments)